Select Page

FEATURED PRODUCTS

2

Related products

3

High-Voltage Switch Mechanical Characteristic Tester Circuit Breaker Tester

Short Description:

The high-voltage switch mechanical characteristic tester can accurately measure the mechanical dynamic characteristic parameters of high-voltage circuit breakers of various voltage levels, such as low oil, high oil, vacuum, and sulfur hexafluoride. High-voltage circuit breakers are responsible for the dual tasks of control and protection in the power system, and their performance is directly related to the safe operation of the power system. The mechanical characteristic parameter is one of the important parameters to judge the performance of the circuit breaker.

Model No.: PS-CB101

Send Email To Us

Q

Product Detail

Core Description

The high-voltage switch mechanical characteristic tester can accurately measure the mechanical dynamic characteristic parameters of high-voltage circuit breakers of various voltage levels, such as low oil, high oil, vacuum, and sulfur hexafluoride. High-voltage circuit breakers are responsible for the dual tasks of control and protection in the power system, and their performance is directly related to the safe operation of the power system. The mechanical characteristic parameter is one of the important parameters to judge the performance of the circuit breaker.

 

Introduction

1. This instrument is an embedded industrial computer, the main board is based on CortexTM-A8, the main frequency is 1GHZ, the flash memory is 1GB, and the boot speed is only 16 seconds. Large 8.4-inch color screen, windows operating system, intuitive user-friendly operation interface, touch screen, support Chinese and English input, easy for on-site operators to use.
2. High-speed thermal printer, convenient for on-site printing of test data.
3. The integrated operating power supply in the machine eliminates the need for on-site secondary power supply, which is convenient and quick to use. It can provide DC5～270V adjustable power supply, current 20A. The operating voltage value of the opening and closing coil can be set arbitrarily, and the low voltage operation test of the circuit breaker can be done.
4. Equipped with linear sensor, rotation sensor, universal sensor and bracket, special fixed multifunctional joint, installation is extremely convenient and simple.
5. Suitable for all types of SF6 switches, GIS combination electrical appliances, vacuum switches, and oil switches produced at home and abroad.
6. The switch action once, get all the data and graphics.
7. The host can store 30000 groups of current test data (expandable memory card), and the real-time clock in the machine is convenient for archiving.
8. Equipped with U disk interface, can directly save the data to the U disk, upload to the computer for analysis and preservation.
9. It can measure 12 metal contact fractures, 6 main fractures and 6 auxiliary fractures at the same time.
10. Contains the envelope curve. The standard envelope curve is generated through the value tested by a switch for analysis and comparison, as well as the switch vibration frequency analysis.
11. The internal anti-interference circuit can satisfy the reliable use in 500KV substation.

 

Parameter

Time measurement 12 channels inherent opening (closing) time
Different periods in the opening (closing) phase
The difference between opening (closing) phases in different periods
Closing (opening) bounce time (bounce times)
Internal trigger test range 0.01ms～20s Resolution 0.01ms,
Empty contact test range 0.01ms～200s Resolution 0.1ms
Accuracy rate within 1000ms 0.05%±1 word
Speed measurement Just opening (just closing) speed
Average speed in a specified time period (stroke period or angle period)
Speed range 1mm sensor 0.01～25.00m/s
0.1mm sensor 0.001～2.50m/s
360° angle sensor 1 cycle/ 0.25°
Stroke measurement Moving contact stroke (stroke)
Contact stroke (open distance)
Overtravel
Overshoot stroke or rebound stroke
Measuring range Linear sensor 50mm Measuring range 0-50mm Resolution 0.1mm
360 line sensor 360° Measuring range 0-1000mm Resolution 0.25
Acceleration sensor measuring range 0-300mm Resolution 0.1mm
Current display Maximum current 30A Resolution 0.01A
Instrument power AC 220V ± 10%；50Hz ± 5%
DC power output DC5～270V continuously adjustable, DC110V≤30A (short time), DC220V≤20A (short time)
Empty contact trigger voltage AC/DC10-300V, current ≤120A
Isolation switch measuring range Voltage output DC5～270V (adjustable)
Power output time 0.01-20 seconds (can be set)
The maximum acquisition time of fracture signal is 200 seconds
It can measure the closing and opening time of the fracture, the three-phase
different period, the bounce time and the number of times
Host volume 360×260×170mm
Use environment -20℃~+50℃
Relative humidity ≤90%

 

 

Leave Your Message

FEATURED PRODUCTS

Related products